{"title":"L-Keys","description":"","products":[{"product_id":"tekton-ball-end-hex-and-star-l-key-set-with-holders-41-piece-0050-38-in-13-10-mm-t6-t50-key91002","title":"TEKTON Ball End Hex and Star L-Key Set with Holders, 41-Piece (0.050-3\/8 in., 1.3-10 mm, T6-T50) | KEY91002","description":"The Tekton 41-pc. Ball End Hex and Star L-Key Set includes the most common inch hex, metric hex, and star key sizes, all stored in durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp)","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139383988470,"sku":"KEY91002","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/mls0vku287qzfxxlnhfx.jpg?v=1774474627"},{"product_id":"tekton-flat-end-hex-and-star-l-key-set-with-holders-41-piece-0050-38-in-13-10-mm-t6-t50-key91003","title":"TEKTON Flat End Hex and Star L-Key Set with Holders, 41-Piece (0.050-3\/8 in., 1.3-10 mm, T6-T50) | KEY91003","description":"The Tekton 41-Piece Flat End Hex and Star L-Key Set includes 0.050–3\/8 inch and 1.3–10 mm flat end hex L-keys, T6–T50 star L-keys, and holders. The keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139384873206,"sku":"KEY91003","price":63.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/bzw1f0bx1wygruqp3eoj.jpg?v=1774474628"},{"product_id":"tekton-star-l-key-set-with-holder-13-piece-t6-t50-klt91402","title":"TEKTON Star L-Key Set with Holder, 13-Piece (T6-T50) | KLT91402","description":"The Tekton 13-pc. Star L-Key Set includes the most common star key sizes from T6 to T50 stored in a durable holder with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • Precise Tip Geometry – The star-shaped ends have 6-lobes that are machined to precise tolerances for an exact, high-torque fit with Torx fasteners that resists camming out • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – Tekton star L-Key sizes are marked both with a high-visibility laser marking and a stamped marking • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139386806518,"sku":"KLT91402","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/mnddhaczshk2giiatkgc.jpg?v=1774474633"},{"product_id":"tekton-flat-end-hex-l-key-set-6-piece-716-34-in-klx90101","title":"TEKTON Flat End Hex L-Key Set, 6-Piece (7\/16-3\/4 in.) | KLX90101","description":"Tekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139387658486,"sku":"KLX90101","price":62.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/gikangl6wwh6lqbmmxow.jpg?v=1774474635"},{"product_id":"tekton-flat-end-hex-l-key-set-9-piece-11-19-mm-klx90201","title":"TEKTON Flat End Hex L-Key Set, 9-Piece (11-19 mm) | KLX90201","description":"Tekton's flat end L-keys cover a range of large fastener sizes, including 7\/16 to 3\/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control the tolerances of our keys and chamfer the edges for a refined tool that provides you with a proper, snug fit every time.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44-50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion  • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139388608758,"sku":"KLX90201","price":83.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/chai6atek8jtqvnkndbm.jpg?v=1774474636"},{"product_id":"tekton-flat-end-hex-l-key-set-15-piece-716-34-in-11-19-mm-klx90301","title":"TEKTON Flat End Hex L-Key Set, 15-Piece (7\/16-3\/4 in., 11-19 mm) | KLX90301","description":"The Tekton 15-Piece Hex L-Key Set includes 7\/16–3\/4 inch and 11–19 mm L-keys. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The L-key sizes are marked with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer to increase leverage when it matters • Two Measures of Tolerance Control – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139388903670,"sku":"KLX90301","price":130.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/fbulmt0azhx70gvegzps.jpg?v=1774474637"},{"product_id":"tekton-ball-end-hex-l-key-set-with-holder-13-piece-0050-38-in-klx91102","title":"TEKTON Ball End Hex L-Key Set with Holder, 13-Piece (0.050-3\/8 in.) | KLX91102","description":"The Tekton 13-pc. Ball End Hex L-Key Set includes the most common inch hex key sizes from 0.050 to 3\/8 inch stored in a durable holder with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque •  • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp) • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139389165814,"sku":"KLX91102","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/nz9hxu4ayesyw8rzzwuh.jpg?v=1774474639"},{"product_id":"tekton-flat-end-hex-l-key-set-with-holder-13-piece-0050-38-in-klx91103","title":"TEKTON Flat End Hex L-Key Set with Holder, 13-Piece (0.050-3\/8 in.) | KLX91103","description":"The Tekton 13-Piece Flat End Hex L-Key Set includes 0.050–3\/8 inch flat end hex L-keys with a holder. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. key is too small to laser mark and the 0.050 in., 1\/16 in., and 5\/64 in.keys are too small to stamp). The durable hex key holder has self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139389427958,"sku":"KLX91103","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/nvrjm4e8dqb9mjk4jobf.jpg?v=1774474640"},{"product_id":"tekton-short-arm-ball-end-hex-l-key-set-with-holder-13-piece-0050-38-in-klx91112","title":"TEKTON Short Arm Ball End Hex L-Key Set with Holder, 13-Piece (0.050-3\/8 in.) | KLX91112","description":"Tekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Quick-Access Holder – We designed our holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139389690102,"sku":"KLX91112","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/u2vwtppxu3cy7s4vqtux.jpg?v=1774474642"},{"product_id":"tekton-ball-end-hex-l-key-set-with-holder-10-piece-13-10-mm-common-sizes-klx91202","title":"TEKTON Ball End Hex L-Key Set with Holder, 10-Piece (1.3-10 mm, Common Sizes) | KLX91202","description":"Tekton L-Keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp) • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139389919478,"sku":"KLX91202","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/tyvgqdo1jztdrhkupglm.jpg?v=1774474643"},{"product_id":"tekton-ball-end-hex-l-key-set-with-holder-15-piece-13-10-mm-klx91203","title":"TEKTON Ball End Hex L-Key Set with Holder, 15-Piece (1.3-10 mm) | KLX91203","description":"The Tekton 15-pc. Ball End Hex L-Key Set includes the most common metric hex key sizes from 1.3 to 10 mm stored in a durable holder with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp) • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139390345462,"sku":"KLX91203","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/zemevl9tzs0rxepcjzc9.jpg?v=1774474645"},{"product_id":"tekton-flat-end-hex-l-key-set-with-holder-10-piece-13-10-mm-common-sizes-klx91204","title":"TEKTON Flat End Hex L-Key Set with Holder, 10-Piece (1.3-10 mm, Common Sizes) | KLX91204","description":"The Tekton 10-Piece Flat End Hex L-Key Set includes 1.3–10 mm flat end hex L-keys with a holder. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 1.3 mm key is too small to laser mark and the 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holder has self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139390574838,"sku":"KLX91204","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/ptzofqvts86gztoe3eev.jpg?v=1774474648"},{"product_id":"tekton-flat-end-hex-l-key-set-with-holder-15-piece-13-10-mm-klx91205","title":"TEKTON Flat End Hex L-Key Set with Holder, 15-Piece (1.3-10 mm) | KLX91205","description":"The Tekton 15-Piece Flat End Hex L-Key Set includes 1.3–10 mm flat end hex L-keys with a holder. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 1.3 mm key is too small to laser mark and the 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holder has self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139391000822,"sku":"KLX91205","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/uqwgxmglaoj0ol4jzabq.jpg?v=1774474650"},{"product_id":"tekton-short-arm-ball-end-hex-l-key-set-with-holder-10-piece-13-10-mm-common-sizes-klx91212","title":"TEKTON Short Arm Ball End Hex L-Key Set with Holder, 10-Piece (1.3-10 mm, Common Sizes) | KLX91212","description":"Tekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Quick-Access Holder – We designed our holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139391426806,"sku":"KLX91212","price":21.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/s6hwdxhixbut3srctrdd.jpg?v=1774474652"},{"product_id":"tekton-short-arm-ball-end-hex-l-key-set-with-holder-15-piece-13-10-mm-klx91213","title":"TEKTON Short Arm Ball End Hex L-Key Set with Holder, 15-Piece (1.3-10 mm) | KLX91213","description":"Tekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Quick-Access Holder – We designed our holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139391852790,"sku":"KLX91213","price":26.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/hohaze5tfarlfwx6xltm.jpg?v=1774474655"},{"product_id":"tekton-ball-end-hex-l-key-set-with-holders-28-piece-0050-38-in-13-10-mm-klx91302","title":"TEKTON Ball End Hex L-Key Set with Holders, 28-Piece (0.050-3\/8 in., 1.3-10 mm) | KLX91302","description":"The Tekton 28-pc. Ball End Hex L-Key Set includes the most common inch hex key sizes from 0.050 to 3\/8 inch and 1.3 to 10 mm stored in durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. The L-keys are coated with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways–both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • 20-Degree Ball Angle Increases Access – Our L-keys implement a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Maximum Torque Strength – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58 to produce tools that are hard, but not brittle; as a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (sizes 0.050 inch and 1.3 mm are too small to laser mark, sizes 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp) • Quick Access and Low-Profile Organization – We designed the holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139392278774,"sku":"KLX91302","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/frqpg629adsawmtrulpi.jpg?v=1774474657"},{"product_id":"tekton-flat-end-hex-l-key-set-with-holders-28-piece-0050-38-in-13-10-mm-klx91303","title":"TEKTON Flat End Hex L-Key Set with Holders, 28-Piece (0.050-3\/8 in., 1.3-10 mm) | KLX91303","description":"The Tekton 28-Piece Flat End Hex L-Key Set includes 0.050–3\/8 inch and 1.3–10 mm flat end hex L-keys with holders. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139392803062,"sku":"KLX91303","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/dnmkrkgp0khvb7ddveoh.jpg?v=1774474660"},{"product_id":"tekton-ball-end-hex-l-key-set-with-holders-23-piece-0050-38-in-13-10-mm-klx91304","title":"TEKTON Ball End Hex L-Key Set with Holders, 23-Piece (0.050-3\/8 in., 1.3-10 mm) | KLX91304","description":"The Tekton 23-Piece Ball End Hex L-Key Set includes the most common hex key sizes, ranging from 0.050–3\/8 inch and 1.3–10 mm. The set includes durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. You can also face the L-keys to the side for a flat, low-profile organization solution. The L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. As a result, the maximum torque of the L-keys consistently exceeds the ASME standards for minimum torsion load and the ISO standards for minimum proof torque. We coat all of our keys with a durable manganese phosphate finish that’s resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways: both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • 20-Degree Ball Angle Increases Access – Our L-keys feature a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Refined Edges – Tekton keys have slightly chamfered edges (except sizes that are too small to be chamfered) and a smooth top face to optimize engagement with fasteners • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139393065206,"sku":"KLX91304","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/eficqxtrdxnomhhxjwbt.jpg?v=1774474661"},{"product_id":"tekton-flat-end-hex-l-key-set-with-holders-23-piece-0050-38-in-13-10-mm-klx91305","title":"TEKTON Flat End Hex L-Key Set with Holders, 23-Piece (0.050-3\/8 in., 1.3-10 mm) | KLX91305","description":"The Tekton 23-Piece Flat End Hex L-Key Set includes 0.050–3\/8 inch and 1.3–10 mm flat end hex L-keys with holders. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139393294582,"sku":"KLX91305","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/omlihwfai3ryf7cq2lvw.jpg?v=1774474663"},{"product_id":"tekton-short-arm-ball-end-hex-l-key-set-with-holders-28-piece-0050-38-in-13-10-mm-klx91312","title":"TEKTON Short Arm Ball End Hex L-Key Set with Holders, 28-Piece (0.050-3\/8 in., 1.3-10 mm) | KLX91312","description":"Tekton's short arm L-keys have one ball-end arm that's the same length as our normal keys, and one flat-end short arm that's markedly shorter than our regular keys. This shorter arm allows the key to fit into tighter spaces where a regular-sized key cannot. The short arm L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54-58 HRC and coated with a highly corrosion-resistant manganese phosphate finish. With the exception of the smallest sizes that are too small to mark, each key has a high-visibility laser marking and a stamped marking that won't rub off.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Short Arm for Access – The L-key's short arm enables you to stay close to the fastener so that you can work in tighter spaces and with greater control • High Leverage – Our L-keys are longer in overall length compared to competitors, providing increased leverage where it matters • Tight Fit with Fasteners – We precisely manufacture our hex key geometry on the large end of the applicable range, resulting in less slop in fasteners • Quick-Access Holder – We designed our holder to organize the L-keys facing forward so you can easily access each tool without having to move others out of the way • 20-Degree Ball End – Our keys implement a steep ball end angle, which increases your ability to access fasteners while still maintaining sufficient strength • Markings and Finish – Each key is marked with a high-visibility size indicator that can't wear off and finished with a manganese phosphate coating that's highly resistant to corrosion","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139393523958,"sku":"KLX91312","price":47.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/bzgxrlwifi7ftcrftnsu.jpg?v=1774474664"},{"product_id":"tekton-short-arm-ball-end-hex-l-key-set-with-holders-23-piece-0050-38-in-13-10-mm-klx91313","title":"TEKTON Short Arm Ball End Hex L-Key Set with Holders, 23-Piece (0.050-3\/8 in., 1.3-10 mm) | KLX91313","description":"The Tekton 23-Piece Short Arm Ball End Hex L-Key Set includes the most common hex key sizes, ranging from 0.050–3\/8 inch and 1.3–10mm. The set includes durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of the way. The L-keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle. We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, L-key sizes are marked in two ways: both with a high-visibility laser marking and a stamped marking.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Short Arm Optimizes for Access – Stay close to the fastener with the short arm L-key that allows you to work in tighter spaces and with greater control • High Leverage – We designed the keys to be longer in the largest sizes to increase leverage where it matters • 20-Degree Ball Angle Increases Access – Our L-keys feature a steep ball-end angle that increases your ability to access fasteners while still maintaining sufficient strength • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139393753334,"sku":"KLX91313","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/m7g3kxlouug4bntxvsia.jpg?v=1774474664"},{"product_id":"tekton-flat-end-hex-l-key-set-with-rack-6-piece-716-34-in-klx92101","title":"TEKTON Flat End Hex L-Key Set with Rack, 6-Piece (7\/16-3\/4 in.) | KLX92101","description":"The Tekton 6-Piece Hex L-Key Set includes 7\/16–3\/4 inch L-keys and a 6-tool hex key rack. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. The L-key sizes are marked with a high-visibility laser marking and a stamped marking. In the included rack, the keys rest in hex-shaped slots, making it easy to take the tools in and out without resistance. Each slot in the rack is made to fit a specific L-key size. Handles on either side of the rack make it easy to lift out of a drawer. The rack is made from 12 gauge steel with a textured powder-coat finish and includes a sheet of size labels.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking • Quick-Access Rack – The included rack has hex-shaped slots that make it easy to take the tools in and out without resistance","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139393982710,"sku":"KLX92101","price":88.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/u4g0xxflthnazbh83bg7.jpg?v=1774474665"},{"product_id":"tekton-flat-end-hex-l-key-set-with-rack-9-piece-11-19-mm-klx92201","title":"TEKTON Flat End Hex L-Key Set with Rack, 9-Piece (11-19 mm) | KLX92201","description":"The Tekton 9-Piece Hex L-Key Set includes 11–19 mm hex L-keys and a 9-tool hex key rack. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. The L-key sizes are marked with a high-visibility laser marking and a stamped marking. In the included rack, the keys rest in hex-shaped slots, making it easy to take the tools in and out without resistance. Each slot in the rack is made to fit a specific L-key size. Handles on either side of the rack make it easy to lift out of a drawer. The rack is made from 12 gauge steel with a textured powder-coat finish and includes a sheet of size labels.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking • Quick-Access Rack – The included rack has hex-shaped slots that make it easy to take the tools in and out without resistance","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139394212086,"sku":"KLX92201","price":109.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/vva2rqkwftbclwahihxe.jpg?v=1774474669"},{"product_id":"tekton-flat-end-hex-l-key-set-with-racks-15-piece-716-34-in-11-19-mm-klx92301","title":"TEKTON Flat End Hex L-Key Set with Racks, 15-Piece (7\/16-3\/4 in., 11-19 mm) | KLX92301","description":"The Tekton 15-Piece Hex L-Key Set includes 7\/16–3\/4 inch and 11–19 mm L-keys with hex key racks. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency. The L-key sizes are marked with a high-visibility laser marking and a stamped marking. In the included racks, the keys rest in hex-shaped slots, making it easy to take the tools in and out without resistance. Each slot in the rack is made to fit a specific L-key size. The handles on either side of the racks make it easy to lift out of a drawer. The racks are made from 12 gauge steel with a textured powder-coat finish and include size label sheets.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer to increase leverage when it matters • Two Measures of Tolerance Control – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • 6150 Steel – We make our keys with 6150 chromium vanadium steel that's heat-treated to 44–50 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139394441462,"sku":"KLX92301","price":182.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/rhmugqrnryvdxgemoriu.jpg?v=1774474669"},{"product_id":"tekton-ball-end-and-flat-end-hex-l-key-set-with-holders-and-racks-43-piece-0050-34-in-13-19-mm-klx99301","title":"TEKTON Ball End and Flat End Hex L-Key Set with Holders and Racks, 43-Piece (0.050-3\/4 in., 1.3-19 mm) | KLX99301","description":"The 24-Piece Ball End and Flat End Hex L-Key Set includes 1.3–10 mm ball end L-keys, 11–19 mm flat end L-keys, a hex key holder, and a hex key rack. The ball end keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC and the flat end keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC. All of the keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 1.3 mm L-key is too small to laser mark and the 1.3, 1.5, and 2 mm keys are too small to stamp). The durable hex key holder has self-aligning key slots that allow keys to be removed and inserted without moving others out of the way, and the steel hex key rack has hex-shaped slots that allow larger keys to be taken in and out without resistance.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• High Leverage – We designed these L-keys to be longer in the largest sizes to increase leverage where it matters • Tight Tolerances – We measure our hex key tolerances in two ways, from point-to-point and side-to-side, to ensure the highest standards of dimensional accuracy and consistency • Corrosion-Resistant – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking (0.050 inch and 1.3 mm are too small to laser mark and 0.050 inch, 1\/16 inch, 5\/64 inch, 1.3 mm, 1.5 mm, and 2 mm are too small to stamp) • Quick-Access Racks – The included racks have hex-shaped slots that make it easy to take the large L-keys in and out without resistance • Low-Profile Holders – The included holders organize the ball end hex L-keys facing forward so you can easily access each tool without having to move others out of the way; you can also face the L-keys to the side for a flat, low-profile organization solution","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139394670838,"sku":"KLX99301","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/heyleviwjrnocjnxdktx.jpg?v=1774474669"},{"product_id":"tekton-flat-end-hex-l-key-set-with-holders-and-racks-43-piece-0050-34-in-13-19-mm-klx99302","title":"TEKTON Flat End Hex L-Key Set with Holders and Racks, 43-Piece (0.050-3\/4 in., 1.3-19 mm) | KLX99302","description":"The Tekton 43-Piece Flat End Hex L-Key Set includes 0.050–3\/4 inch and 1.3–19 mm flat end hex L-keys with holders and racks. The smaller flat end keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC and the larger flat end keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC. All of the keys are coated with a durable manganese phosphate finish that's resistant to corrosion. With the exception of the smallest sizes, Tekton L-keys are marked in two ways—both with a high-visibility laser marking and a stamped marking (the 0.050 in. and 1.3 mm keys are too small to laser mark and the 0.050 in., 1\/16 in., 5\/64 in., 1.3 mm, 1.5 mm, and 2 mm keys are too small to stamp). The durable hex key holders have self-aligning key slots that allow keys to be removed and inserted without moving others out of the way, and the steel hex key racks have hex-shaped slots that allow larger keys to be taken in and out without resistance.\u003cstrong\u003eFeatures:\u003c\/strong\u003e• Tight Fit with Fasteners – In order to create a reliable, tight fit with fasteners, our L-keys are slightly larger in size with narrower tolerances than most competitors that follow the ASME standards • Two Measures of Tolerance Control – We measure our hex key tolerances from point-to-point and side-to-side to ensure the highest standards of dimensional accuracy and consistency • 8660 Steel – We make our L-keys with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that are hard, but not brittle • Corrosion-Resistant Finish – We coat all of our keys with a durable manganese phosphate finish that's resistant to corrosion • Clear Markings – With the exception of the smallest sizes, Tekton L-key sizes are marked in two ways: with a high-visibility laser marking and a stamped marking","brand":"Tech Choice Tools","offers":[{"title":"Default Title","offer_id":50139394900214,"sku":"KLX99302","price":229.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/jxrms1bvbvkiitgjuhvt.jpg?v=1774474676"},{"product_id":"gripedge-9-pc-rpt-long-metric-hex-key-set","title":"GripEdge | 9-PC RPT Long Metric Hex Key Set","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eIntroducing the GripEdge Tools 9-Piece Metric Long Hex Key Set. Featuring Rounding Prevention Technology™ (RPT™) and ball-hex geometry, each key grips confidently even in angled or confined spaces that are too often common in automotive, industrial, and agricultural applications. S2 steel construction and a black manganese finish with the industry's most aggressive knurling, ensure durability under daily use, and superior purchase in your hand, while the locking, folding wallet-style holder keeps the set organized and ready for any job, whether in the field or at the bench. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003e9-Piece Set Sizes:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003e1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eRounding Prevention Technology™ (RPT™):\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eProvides up to 50% more grip on intact fasteners and up to 400% more on damaged fasteners compared to standard tools\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eBall Hex Tips:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eAllows up to 20° of pivot for angled access without sacrificing control\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eExtra-Long Bars:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eExtended length provides reach for deep or obstructed fasteners\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eErgonomics:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eRound-bar design with a knurled section for positive hand grip, even in wet or oily conditions\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eColor-Eye-D™ Coding:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003e Rapid visual size differentiation. Black \u0026amp; Grey denote Metric (MM)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eMaterial:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eS2 tool steel delivers high strength, toughness, and long-term durability\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eClear Markings:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eLarge laser-etched markings for quick and accurate identification\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan class=\"s14\"\u003eHolder:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan class=\"s14\"\u003eLocking, folding wallet-style holder with patented C-Grip™ slot geometry for secure retention and precise removal\u003c\/span\u003e\u003c\/p\u003e","brand":"Techs Choice Tools","offers":[{"title":"Default Title","offer_id":50721373454582,"sku":"GET LKHM9LS","price":79.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0798\/4680\/1654\/files\/LKHM9LS_4_1.webp?v=1779305414"}],"url":"https:\/\/techschoicetools.com\/collections\/l-keys.oembed","provider":"Techs Choice Tools","version":"1.0","type":"link"}