All Products (Best Sellers)

Made for maximum versatility, the all-purpose Tekton 10 in. Slip Joint Pliers have universal 3-zone jaws for gripping flat, round, hex, and square shapes, and they have a wire shear that cleanly cuts any solid wire.Features:• Universal 3-zone jaws grip multiple shapes and cleanly...

Ideal for plumbing and mechanical work, the nonslip, pipe-wrench bite of the Tekton Groove Joint Pliers will find its way into just about any project. Pliers broad, rounded handle profile distributes force evenly across your hand to reduce stress and pressure. Slim, nonslip grips...

Ideal for plumbing and mechanical work, the nonslip pipe-wrench bite of the Tekton 13 in. Groove Joint Pliers will find its way into just about any project.Features:• Sharp, angled pipe-wrench-style teeth offer a sure bite • Undercut tongue and grooves interlock for superior joint...

This wrench holder is designed for Tekton 1/4–1 inch (SAE) combination wrenches and may not fit other types or brands of wrenches. The holder has flexible teeth that firmly grip wrenches in place to prevent them from falling out. The low-profile wrench holder fits...

The extra large size and nonslip pipe-wrench bite of the Tekton 16 in. Groove Joint Pliers is ideal for big plumbing and mechanical jobs.Features:• Sharp, angled pipe-wrench-style teeth offer a sure bite • Undercut tongue and grooves interlock for superior joint strength • Nut...

Ideal for plumbing and mechanical work, the nonslip pipe-wrench bite of the Tekton 10 in. Groove Joint Pliers will find its way into just about any project.Features:• Sharp, angled pipe-wrench-style teeth offer a sure bite • Undercut tongue and grooves interlock for superior joint...

This wrench holder is designed for Tekton 1/4–7/8 inch (SAE) combination wrenches and may not fit other types or brands of wrenches. The holder has flexible teeth that firmly grip wrenches in place to prevent them from falling out. The low-profile wrench holder fits...

It is often more difficult than it should be working with clips and fasteners. It is a job that rewards using the right tool. This set has been designed to remove the most stubborn and hard-to-reach clips. Each tool in this kit has a...

Features and Benefits: 120XP 3 degree ratcheting swing arc for accessibility Torque Accuracy 2% CW, 3% CCW in 20 - 100% range 15 Degree Flex-Head for Access 5 Torque Measurement Units: Ft-lb, In-lb, Nm, Kg-m, Kg-cm for Versatility Pre-Set 10 Regularly Used Torque Settings...

The Tekton Lidded Drawer with 12-Cavity Parts Tray is part of the L-BOXX Stacking Organization System is part of the L-BOXX Stacking Organization System and easily integrates with all other components in the L-BOXX family of products, providing virtually infinite options for configuring your...

Each Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry...

Tekton's two-piece design allows us to optimize the steel alloys, heat treatments, and forming processes for the bit and socket separately, resulting in a tool that's higher performing and more durable than traditional one-piece impact bit sockets. The two pieces are permanently press-fit together...

Tekton 12-point sockets are an exact fit for double hex fasteners and also work with hex and square shapes. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to...

Features:

Tekton 1/4 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The soft overmold...

Tekton Socket Rails are universal socket organizers that securely hold 1/4 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the clips to lock...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Made to reach fasteners in difficult spaces, this wrench offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions.Features:• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of...

Each Tekton reversible ratcheting combination wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The 15-degree offset box end wrench geometry...

Tekton 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

Slide the drive end of any 3/8 inch drive crowfoot wrench onto the Tekton 3/8 Inch Drive x 10 Inch Crowfoot Wrench Organizer Key for compact and portable organization. The key is molded from high-quality polypropylene material that is durable and easy to clean....

The Tekton Lidded Drawer with 7-Cavity Parts Tray is part of the L-BOXX Stacking Organization System and is part of the L-BOXX Stacking Organization System and easily integrates with all other components in the L-BOXX family of products, providing virtually infinite options for configuring...

Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The classic non-quick-release...

Tekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater...

Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The classic non-quick-release...

Tekton S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The tips are machined to exact tolerances for precise engagement with fasteners. The set includes a twist-to-lock socket rail that keeps the sockets securely organized.Features:•...

Tekton 3/8 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

Tekton impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Precise 6-point and 12-point openings provide an exact fit for hex and 12-point...

Tekton Mini Extensions are our most compact extensions. They can be used by themselves or added onto other extensions to achieve just the right amount of reach. Their polished, chrome-plated finish easily wipes clean and is highly resistant to corrosion.Features:• Use mini extensions by...

Tekton offset box end wrenches have a generous 45-degree offset, creating plenty of clearance for your fingers and allowing an easy reach over and around obstacles. The 12-point openings double the access angles of 6-point wrenches and make it easier to work in tight...

Tekton impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Precise 6-point openings provide an exact fit for hex fasteners. Each socket size...