Tekton

Tekton 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas....

Use these stickers to clearly identify the socket sizes on your rail organizers. The size is printed twice on each sticker so that you can see it from both the top and side of the rail clip.Features:

Features:

The Tekton 3-Piece 3/8 Inch Drive Impact Extension Set reaches past obstructions or into tight, narrow spaces and delivers the torque needed to break loose stubborn fasteners. A spring-loaded detent ball securely latches onto sockets, preventing them from being dropped or left stuck on...

Tekton adjustable wrenches feature a 0 to 1-1/2 inch (0 to 38 mm) jaw capacity with high-contrast, laser-engraved inch and metric scales. The low-pitch angle and tight fit between the gear and the teeth prevent the jaw from sliding open during use and allow...

Tekton Bit Sockets have heat-treated S2 steel bits that are press-fit into the socket for a straight, tightly mated fit that can't loosen over time or under stress. The tips are machined to precise tolerances for an exact fit with hex or Torx fasteners....

Tekton impact drive extensions extend your reach. Attach an extension to your drive tool to reach past obstructions or into tight spaces. The extension works with both friction ring and detent pin anvils. Smooth walls without grooves support friction ring engagement, and a detent...

The Tekton Mini Pry Bar Set (6-Piece) has two mini pry bars with 30-degree angled ends, two mini pry bars with 50-degree angled ends, and two straight mini pry bars. Three of the mini pry bars have a 5/32 inch shaft diameter, and three...

The Tekton 6 Inch Adjustable Wrench features a 0 to 1-1/2 inch (0 to 38 mm) jaw capacity with high-contrast, laser-engraved inch and metric scales. The low-pitch angle and tight fit between the gear and the teeth prevent the jaw from sliding open during...

Adding extra length to get past obstructions or into tight, narrow spaces, Tekton Extensions access hard-to-reach fasteners, allowing you to work faster and avoid extra disassembly steps.Features:• Knurled band provides grip for starting or turning loosened fasteners with fingertips • Polished, chrome-plated finish easily...

Tekton Locking Extensions feature an easy-to-use locking mechanism. Push sockets or accessories onto the extension drive tang to lock them on, and pull down on the collar to release them. The extensions are made from 6140 chromium-vanadium steel with a 8660 nickel-chromium-molybdenum collar, and...

The Tekton 3-Piece 1/2 Inch Drive Impact Extension Set reaches past obstructions or into tight, narrow spaces and delivers the torque needed to break loose stubborn fasteners. A spring-loaded detent ball securely latches onto sockets, preventing them from being dropped or left stuck on...

Adding extra length to get past obstructions or into tight, narrow spaces, Tekton Extensions access hard-to-reach fasteners, allowing you to work faster and avoid extra disassembly steps.Features:• Knurled band provides grip for starting or turning loosened fasteners with fingertips • Polished, chrome-plated finish easily...

Tekton impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Precise 6-point openings provide an exact fit for hex fasteners. Each socket size...

Tekton 10-Compartment Organizer Trays have compartments of varying shapes and sizes to fit a wide range of objects. The low-profile tray is 1.5 inches tall and fits into most shallow tool cabinet drawers. The USA-made tray is constructed from a high-quality polypropylene material that...

Tekton Bit Sockets have heat-treated S2 steel bits that are press-fit into the socket for a straight, tightly mated fit that can't loosen over time or under stress. The tips are machined to precise tolerances for an exact fit with hex or Torx fasteners....

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Tekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater...

Tekton Wobble Extensions offer two positions for use: a wobble position that allows the extension to operate at an angle of at least 7.5 degrees in any direction and a straight position that allows the wobble extension to act as a traditional extension. The...

Tekton 3/8-inch drive crowfoot wrenches are designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a...

Tekton 72-Tooth Split Beam Torque Wrenches are easy to read and easy to set. Quickly turn to the desired torque value with a smooth thumbscrew adjustment. Teeth inside the cover lock the torque setting in place while you are using the wrench. Because there's...

Tekton 3/4 Inch Drive Sockets are well-suited for big service and repair jobs on heavy equipment, trucks, tractors, and large machinery. The complete range of sizes from 3/4 to 2 inch and consistently meet or exceed the industry standards for socket strength and performance.Features:•...

Tekton impact drive sockets have two size markings—both a high-visibility laser marking and a permanent stamped marking. The interior well of the socket extends fully into the socket, which allows for better fastener engagement in more situations. Each socket works with both friction ring...

Tekton Universal Joint Sockets have a compact design for tight spaces. The sockets have a 4-pin joint design that reduces the overall height of the socket compared to a universal joint adapter with a shallow socket. The compact joint rotates smoothly and continuously at...

Tekton Wobble Extensions offer two positions for use: a wobble position that allows the extension to operate at an angle of at least 7.5 degrees in any direction and a straight position that allows the wobble extension to act as a traditional extension. The...

The Tekton 1/2 Inch Drive Split Beam Torque Wrench is accurate to +-4% throughout its entire 40-250 foot-pound range. Each wrench is serialized and calibrated according to the ASME B107.300-2010 standard. The detailed test results are recorded on the included calibration certificate. Unlike other...

Tekton impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Each socket size meets a minimum of 1.3 times the ANSI/ASME standard for...

Tekton solid punches can be used to knock loose stubborn fasteners. These powerful solid punches are machined to precise tolerances and are designed to loosen pins, plugs, rivets, or damaged bolts that are stuck in the workpiece. The punches have a blunt end and...

Tekton roll pin punches can be used to drive out or insert hollow pins. The long, straight punch is machined to precise tolerances and has a guide ball on the tip to drive out or insert hollow pins without damaging them or the workpiece....

The Tekton 20-Piece Punch and Chisel Set has four punch and chisel types that are carefully machined to meet exact tolerances: pin punches, solid punches, center punches, and cold chisels. Each punch and chisel is individually heat treated to harden and strengthen the tip...

The Tekton 18-Piece Punch Set with Walnut Block has four punch types that are carefully machined to meet exact tolerances: pin punches, roll pin punches, solid punches, and center punches. Each punch is individually heat treated to harden and strengthen the tip while maintaining...