All Products (Best Sellers)

Ensure tire safety with the TOPDON Tire Tread Depth Gauge, a high-precision TP58 TPMS tool accessory designed for quick, accurate tread depth measurement. Detect worn tires, alignment issues, and damage in seconds. With ±1% precision, no batteries needed, and instant visual alerts, it streamlines...

Tekton 1/4 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

Tekton 12-point sockets are an exact fit for double hex fasteners and also work with hex and square shapes. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to...

The universal joint socket combines a shallow 6-point socket and compact universal joint for a tool that's even smaller than a typical socket and universal joint used together. The condensed size and flexibility of the u-joint socket allows you to reach around obstructions and...

This Tekton Socket Organizer Set is a universal socket organizer that securely holds 3/8 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the...

Each Tekton Stubby Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. These stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the...

The TOPDON BoostQ DC Fast Charger is the ultimate solution for businesses seeking efficient, high-performance electric vehicle charging. Designed to deliver ultra-fast charging speeds, this state-of-the-art charger ensures commercial fleets, public charging stations, and high-traffic locations stay powered and operational. With cutting-edge technology, robust...

Tekton Dead Blow Hammers contain round steel shot inside the head to reduce post-strike rebound and allow for better-controlled hits to the workpiece. The striking faces on the hammers are made of 4140 chromium-molybdenum steel that's heat-treated to 52 HRC. The jackets of the...

Tekton 10-Compartment Organizer Trays have compartments of varying shapes and sizes to fit a wide range of objects. The low-profile tray is 1.5 inches tall and fits into most shallow tool cabinet drawers. The USA-made tray is constructed from a high-quality polypropylene material that...

Tekton cold chisels are designed to cut and shear metal parts. The chisels cut rusted bolts and rivet heads, and clean burrs and rough edges off cast iron, steel, brass, bronze, copper, and aluminum. They're ideal in spaces too tight for a saw and...

Tekton S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The 6-lobe, high-torque bit has a hollowed center to accommodate the post on Tamper-Resistant Torx® fasteners. The set includes a twist-to-lock socket rail to keep...

This wrench holder is designed for Tekton 6–19 mm (metric) stubby combination wrenches and may not fit other types or brands of wrenches. The holder has flexible teeth that firmly grip wrenches in place to prevent them from falling out. The low-profile holder fits...

Each Tekton ratcheting flex head wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The flex head sweeps smoothly through 180-degrees...

Features:

The universal joint socket combines a shallow 6-point socket and compact universal joint for a tool that's even smaller than a typical socket and universal joint used together. The condensed size and flexibility of the u-joint socket allows you to reach around obstructions and...

Tekton Retaining Ring Pliers are built for a single, dedicated purpose. By keeping things simple and free of unnecessary features, they remain lean and optimized for the job. Just grab them and go—no adjustments, loose parts, or compromises. The tips of the pliers are...

Tekton breaker bars have heads that pivot smoothly and continuously through a 230-degree arc. An internal spring controls the tension of the head, allowing it to hold its position while you work. The head is made of AISI 4140 steel and heated to be...

Tekton impact bit sockets have both a high-visibility laser size marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Our two-piece bit socket design allows us to optimize the steel...

Tekton locking pliers and C-clamps are ideal for clamping and holding together a variety of materials including flat stock, L-angle, and sheet metal. Swivel pads at the ends of the jaws provide more surface contact than fixed points, offering a more secure and gentler...

Tekton 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas....

Made to reach fasteners in difficult spaces, this wrench offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions.Features:• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of...

Tekton 1/2 inch drive 12-point sockets are an exact fit for double hex fasteners and also work with hex and square shapes. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are...

Tekton 3/8 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

CAN-FD Cable is designed to support diagnosis of vehicle models with CAN FD protocol, including 2018-2020 GM and Ford vehicles.It works with Vehicle Communication Interfaces (VCIs) that enable tablets scanners to communicate via the CAN FD communications protocol and diagnose the vehicle.Features:Works With The...

Tekton 3/8 inch drive folding ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The classic...

Tekton 3/8 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

This Tekton Socket Organizer Set is a universal socket organizer that securely holds 1/2 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the...

Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The classic non-quick-release...

Features:

Tekton 3/4 Inch Drive Sockets are well-suited for big service and repair jobs on heavy equipment, trucks, tractors, and large machinery. The sizes range from 19 to 50 mm and consistently meet or exceed the industry standards for socket strength and performance.Features:• Standard-length socket...

Tekton 1/2 inch drive 12-point sockets are an exact fit for double hex fasteners and also work with hex and square shapes. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. The large, die-stamped markings are...