All Products (Best Sellers)

Designed for versatility, the jaw profile of the Tekton 7 Inch Curved Jaw Locking Pliers is a combination of an irregular curve and a straight tip. The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive, nonslip...

The LAC01-06 target is used for front camera calibration of Toyota/Lexus.Features:1.Eco-Friendly Aluminum Panel ConstructionCrafted from recyclable, eco-conscious aluminum panels, our targets offer a sustainable alternative to plastic or composite materials—combining durability with environmental responsibility.2.OEM-Compliant DesignEngineered to meet Original Equipment (OE) specifications, ensuring seamless compatibility...

Designed for versatility, the jaw profile of the Tekton Curved Jaw Locking Pliers is a combination of an irregular curve and a straight tip. The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive, nonslip bite of...

Made to reach fasteners in difficult spaces, this wrench offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions.Features:• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of...

Each Tekton ratcheting flex head wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The flex head sweeps smoothly through 180-degrees...

Tekton Socket Rails are universal socket organizers that securely hold 1/2 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the clips to lock...

This Tekton Socket Organizer Set is a universal socket organizer that securely holds 3/8 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the...

Use the Tekton 3/8 in. Drive Twist Lock Socket Clips to add more sockets and ratchet accessories to the Tekton Socket Rail.Features:• Extra socket clips for use with Tekton Socket Rails • Patented twist-to-lock design is simple and secure • Turn socket 45 degrees...

Add an additional 9.5 feet to your Tornado90000 clamps with this extension cable.Features:Extended ReachAdds an extra 9.5 feet to your Tornado90000 clamps, allowing for more flexibility and easier access to hard-to-reach areas.Durable ConstructionBuilt with high-quality materials to ensure reliable performance and withstand wear, ensuring...

With a space-saving folding handle and nonslip wrench grippers, the TEKTON 8-Tool Box End Wrench Holder is a toolbox drawer organizer and a secure carrier that goes with you.Features:

These wrench rails accommodate Tekton wrench sizes 1/4–1/16 inch (SAE) and 6–27 mm (metric). Forward rails allow you to arrange your wrenches from smallest-to-largest, and reverse rails arrange your wrenches from largest-to-smallest. The wrench rails are our lowest profile organization option, designed to fit...

Tekton 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

Features:Warranty:

Tekton cold chisels are designed to cut and shear metal parts. The chisels cut rusted bolts and rivet heads, and clean burrs and rough edges off cast iron, steel, brass, bronze, copper, and aluminum. They're ideal in spaces too tight for a saw and...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Tekton 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

Tekton 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas....

Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The classic non-quick-release...

Use the Tekton 3/4 in. Drive Twist Lock Socket Clips to add more sockets and ratchet accessories to the Tekton Socket Rail.Features:• Extra socket clips for use with Tekton Socket Rails • Patented twist-to-lock design is simple and secure • Turn socket 45 degrees...

Features:

Features:

Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials...

Tekton 1/2 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The classic non-quick-release...

Tekton S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. Its chamfered end easily slides into fasteners, reducing wear....

Features:

Tekton impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Each socket size meets a minimum of 1.3 times the ANSI/ASME standard for...

Tekton 3/8 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The quick-release drive...

Tekton 3/8 and 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under...

Features:

The Tekton Open Top Drawer with 7-Cavity Parts Tray in Stacking Drawer Rack is part of the L-BOXX Stacking Organization System and connects with all other components in the L-BOXX family of products, providing virtually infinite options for configuring your own custom organization system....

Tekton 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas....