All Products (Best Sellers)

Tekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater...

The Tekton 13-tool L-key holder is a low profile organization solution for your L-keys that provides easy access to each tool without having to move others out of the way. Holder slots are uniquely shaped to guide the head of each L-key into alignment...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Slide the drive end of any 3/8 inch drive crowfoot wrench onto the Tekton 3/8 Inch Drive x 8 Inch Crowfoot Wrench Organizer Key for compact and portable organization. The key is molded from high-quality polypropylene material that is durable and easy to clean....

This Tekton Socket Organizer Set is a universal socket organizer that securely holds 3/4 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the...

Features:

Tekton 1/4, 3/8, and 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Tekton locking pliers and C-clamps are ideal for clamping and holding together a variety of materials including flat stock, L-angle, and sheet metal. Access areas with limited clearance where a standard C-clamp might not fit. The reduced height also makes the clamp more stable,...

Tekton 3/8 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

TOPDON's J1772 to Tesla Charging Adapter is a must-have accessory for Tesla owners. This adapter lets your Tesla charge with the J1772 cable. Designed to fit all Tesla models 3, Y, S, and X, this adapter offers a simple plug-and-play experience for hassle-free charging....

The Tekton 50-Degree Angled End Mini Pry bar is thoughtfully designed in every way; angled end, shaft and handle. The 50-degree angled end provides a greater range of motion for prying and lifting up components than most other small pry bars. The 30-degree angled...

Features:

Features:

Tekton 1/4, 3/8, and 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip...

ACC Target accessory for the Phoenix Mobile ADAS.The LAM05-02 ACC Reflector is used for radar calibration of Volkswagen/Volkswagen_CV/AUDI/SKODA/SEAT/Bentley, Porsche, BMW/MINI/Rolls-Royce, Dodge/Jeep, FIAT, Alfa Romeo, Hyundai/Kia, Nissan/Infiniti, Sprinter, Maserati, mitsubishi, Suzuki, BYD, Chery.Features:OEM-Compliant DesignEngineered to meet Original Equipment (OE) specifications, ensuring seamless compatibility with manufacturer...

Tekton Impact Bit Sockets have a two-piece design that allows us to optimize the steel alloys, heat treatments, and forming processes for the bit and socket separately, resulting in a tool that's higher performing and more durable than traditional one-piece impact bit sockets. The...

Tekton 1/4, 3/8, and 1/2 inch drive ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress....

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials...

Tekton S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. The 6-sided hexagonal tip is machined to precise tolerances for an exact fit with hex fasteners. Its chamfered end easily slides into fasteners, reducing wear.Features:•...

Tekton 6-point sockets are ideal for working with hex-shaped fasteners. They're designed to grip the sides and not the corners of the fastener heads, which prevents round-off. Their extended length allows the deep socket to fit over long fasteners and reach into recessed areas....

Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials...

Tekton Long Fixed/Flex Head 12-Point Ratcheting Box End Wrenches each have one wrench size and two head styles. The double box ends are the same size and both are 12-point, but one side features a raised fixed head while the other has a ratcheting...

Tekton Angle Head Open End Wrenches allow you to progressively turn fasteners and fittings in confined spaces, saving you time because you can continue to work without disconnecting or dismantling equipment to access hard-to-reach areas. The 30 and 60 degree angled heads provide greater...

Features:

Each Tekton Stubby Combination Wrench is permanently marked with a stamped size marking on both sides for easy identification. These stubby wrenches have a shorter handle than full-size combination wrenches for increased versatility and access into tight spaces. The 12-point box end doubles the...

Tekton impact bit sockets have both a high-visibility laser size marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Our two-piece bit socket design allows us to optimize the steel...

Tekton impact sockets have both a high-visibility laser marking and a permanent stamped marking that won't wear off. They're designed for use with both friction ring anvils and detent pin anvils. Precise 6-point openings provide an exact fit for hex fasteners. Each socket size...

Tekton 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The...

Each Tekton ratcheting flex head wrench is permanently marked with both a high-visibility laser marking and a stamped marking for easy size identification. The 12-point box end fits multiple types of fasteners including 6-point, 12-point, and square. The flex head sweeps smoothly through 180-degrees...