Products

Features:

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Designed for versatility, the jaw profile of the Tekton Curved Jaw Locking Pliers is a combination of an irregular curve and a straight tip. The curved section locks onto hex-shaped bolt heads, rounded-off nuts, pipes, and square tubing with the aggressive, nonslip bite of...

Features:

Featuring the three essential types of cutting pliers, this set includes diagonal cutters for copper, aluminum, and soft steel wire, end cutters to clip off or pull out nails and staples, and cable cutters to cleanly shear round wire and cable.Features:• Diagonal cutting pliers...

Tekton Deadblow Hammers reduce the post-strike rebound that is common with other hammers and mallets, allowing for better controlled hits to the workpiece. Unlike lead or other common fill material, steel shot inside the head of the dead blow hammer flows smoothly without sticking...

Tekton Dead Blow Hammers contain round steel shot inside the head to reduce post-strike rebound and allow for better-controlled hits to the workpiece. The hammers are jacketed with a hot cast polyurethane that's highly resistant to chipping, cracking, and tearing. The contoured handles and...

Includes: 7 and 10 inch deep bite round jaw locking pliers. The handle allows for one-hand pull release. With a curved jaw that grips round, hex, square, flat stock, sheet metal. Item #PLK90201Features:• Round jaw profile holds round, hex, and square shapes • Unique...

The Tekton 41-Piece Flat End Hex and Star L-Key Set includes 0.050–3/8 inch and 1.3–10 mm flat end hex L-keys, T6–T50 star L-keys, and holders. The keys are made with 8660 nickel chromium molybdenum steel that's heat-treated to HRC 54-58. The keys are coated...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...

The Tekton 10-Piece Flat End Hex L-Key Set includes 1.3–10 mm flat end hex L-keys with a holder. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's...

The Tekton 13-Piece Flat End Hex L-Key Set includes 0.050–3/8 inch flat end hex L-keys with a holder. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's...

The Tekton 15-Piece Flat End Hex L-Key Set includes 1.3–10 mm flat end hex L-keys with a holder. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate finish that's...

The Tekton 43-Piece Flat End Hex L-Key Set includes 0.050–3/4 inch and 1.3–19 mm flat end hex L-keys with holders and racks. The smaller flat end keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC and the larger flat...

The Tekton 23-Piece Flat End Hex L-Key Set includes 0.050–3/8 inch and 1.3–10 mm flat end hex L-keys with holders. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate...

The Tekton 28-Piece Flat End Hex L-Key Set includes 0.050–3/8 inch and 1.3–10 mm flat end hex L-keys with holders. The keys are made from 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC. The keys are coated with a durable manganese phosphate...

The Tekton 6-Piece Hex L-Key Set includes 7/16–3/4 inch L-keys and a 6-tool hex key rack. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. The L-key...

The Tekton 9-Piece Hex L-Key Set includes 11–19 mm hex L-keys and a 9-tool hex key rack. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. The...

The Tekton 15-Piece Hex L-Key Set includes 7/16–3/4 inch and 11–19 mm L-keys with hex key racks. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. We...

The Tekton 15-Piece Hex L-Key Set includes 7/16–3/4 inch and 11–19 mm L-keys. The L-keys are made from 6150 chromium vanadium steel that's heat-treated to 44–50 HRC and coated with a durable manganese phosphate finish that's resistant to corrosion. We measure our hex key...

Tekton's flat end L-keys cover a range of large fastener sizes, including 7/16 to 3/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control...

Tekton's flat end L-keys cover a range of large fastener sizes, including 7/16 to 3/4 inch and 11 to 19 mm. The keys are made from 6150 that's heat-treated to 44-50 HRC and coated with a highly corrosion-resistant manganese phosphate finish. We tightly control...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...

Tekton T-handle keys are made the same way as our L-keys with the addition of a molded handle that makes applying torque easier and more comfortable. They are made with 8660 nickel chromium molybdenum steel that's heat-treated to 54–58 HRC to produce tools that...