Tekton Dead Blow Hammers contain round steel shot inside the head to reduce post-strike rebound and allow for better-controlled hits to the workpiece. The hammers are jacketed with a hot cast polyurethane that's highly resistant to chipping, cracking, and tearing. The contoured handles and...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Each Tekton combination wrench is permanently marked with a stamped size marking on both sides for easy identification. The 12-point box end doubles the available access angles compared to a 6-point end. It is designed to contact and apply force to the sides of...

Tekton cold chisels are designed to cut and shear metal parts. The chisels cut rusted bolts and rivet heads, and clean burrs and rough edges off cast iron, steel, brass, bronze, copper, and aluminum. They're ideal in spaces too tight for a saw and...

The Tekton 5-Piece Blunt Pick Set has four blunt picks and one blunt hook for a variety of precise applications. The rounded tips have a 0.040 inch diameter (about the size of a ballpoint pen) that reduces the risk of damage to soft or...

Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials...

The Tekton 23-Piece Ball End Hex L-Key Set includes the most common hex key sizes, ranging from 0.050–3/8 inch and 1.3–10 mm. The set includes durable holders with self-aligning key slots that allow keys to be removed and inserted without moving others out of...

Made to reach fasteners in difficult spaces, this wrench offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions.Features:• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of...

Tekton Retaining Ring Pliers are built for a single, dedicated purpose. By keeping things simple and free of unnecessary features, they remain lean and optimized for the job. Just grab them and go—no adjustments, loose parts, or compromises. The tips of the pliers are...

Tekton Modular Wrench Organizers allow you to customize your organization system to fit your wrench collection perfectly. The tapered shape of the organizers fit a wide range of wrench sizes with consistent spacing between each tool. Durable polypropylene construction resists fuels and chemicals and...

Features:

Made to reach fasteners in difficult spaces, this wrench offers 12-point box ends that are generously offset 45 degrees to go over and around obstructions.Features:• Ends are offset 45 degrees to reach over and around obstructions • 12-point openings double the access angles of...

Tekton 72-Tooth Split Beam Torque Wrenches are easy to read and easy to set. Quickly turn to the desired torque value with a smooth thumbscrew adjustment. Teeth inside the cover lock the torque setting in place while you are using the wrench. Because there's...

Tekton 3/8 and 1/2 inch drive flex head ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under...

Tekton 3/8 inch drive small body ratchets use the same body as our 1/4 inch ratchets so that you get the access and agility of a smaller handle and ratchet head in 3/8 inch drive. To be clear and consistent about the size of...

Tekton breaker bars have heads that pivot smoothly and continuously through a 230-degree arc. An internal spring controls the tension of the head, allowing it to hold its position while you work. The head is made of AISI 4140 steel and heated to be...

Tekton breaker bars have heads that pivot smoothly and continuously through a 230-degree arc. An internal spring controls the tension of the head, allowing it to hold its position while you work. The head is made of AISI 4140 steel and heated to be...

Tekton Angled End Handled Pry Bars are made with a bar stock that's heat-treated to balance strength and toughness. The black oxide finish won't flake or chip off. The end of the pry bar is angled for prying and positioning: slide in between materials...

This Tekton Socket Organizer Set is a universal socket organizer that securely holds 3/8 inch drive sockets and bit sockets. Rail capacity may vary based on individual socket diameters. Place sockets onto the clips to store them loosely, or twist them clockwise onto the...

Features:

Tekton's two-piece design allows us to optimize the steel alloys, heat treatments, and forming processes for the bit and socket separately, resulting in a tool that's higher performing and more durable than traditional one-piece impact bit sockets. The two pieces are permanently press-fit together...

The high-torque, 6-point opening of Tekton Spark Plug Sockets snugly fits spark plug hex nuts without slipping. A rubber grommet inside holds onto the plug, keeping it safe and secure during removal and installation.Features:• 6-point opening exactly fits the hex nut of a spark...

Tekton S2 steel bits are press-fit into the socket for a straight, permanent connection that can't loosen over time. Die-stamped markings are permanently impressed into the steel and can’t wear off. The triple square tip geometry is machined to precise tolerances for an exact...

Tekton 3/8-inch drive crowfoot wrenches are designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a...

Tekton 3/8-inch drive crowfoot wrenches are designed as ultimate access tools that can fit into tight spaces where others can't. These wrenches are finished with an electroless nickel plating process that offers several key advantages, including complete corrosion protection on interior surfaces and a...

The Tekton 3/8 Inch Drive Split Beam Torque Wrench is accurate to +-4% throughout its entire 20-100 foot-pound range. Each wrench is serialized and calibrated according to the ASME B107.300-2010 standard. The detailed test results are recorded on the included calibration certificate. Unlike other...

Tekton 3/8 inch drive folding ratchets have a 90-tooth gear that produces a working swing arc of 4 degrees. The single half-moon pawl maintains 9 teeth engaged with the gear at all times, ensuring that it won't slip or skip under stress. The quick-release...

Tekton Universal Joint 6-Point Impact Sockets have a compact design for tight spaces. The joint of the socket rotates smoothly and continuously at up to a 30-degree angle. Our solid ball-and-socket style joint is stronger than joints that use pins. The 6-sided ball operates...

Tekton Universal Joint 6-Point Impact Sockets have a compact design for tight spaces. The joint of the socket rotates smoothly and continuously at up to a 30-degree angle. Our solid ball-and-socket style joint is stronger than joints that use pins. The 6-sided ball operates...

Tekton Universal Joint 6-Point Impact Sockets have a compact design for tight spaces. The joint of the socket rotates smoothly and continuously at up to a 30-degree angle. Our solid ball-and-socket style joint is stronger than joints that use pins. The 6-sided ball operates...